315-630 Semi-Automatic HDPE Pipe Butt Fusion Welding Machine/Fusion Butt Welder Workshop Machine

RIYANG BUTT FUSION WELDING MACHINE V630

Riyang V series is on-site hydraulic butt fusion welding machine.

It is used to butt weld pipe and fittings such elbow, tees, wye and flange necks without any additional equipment by simply adjusting the clamps and drag bar.

It is suitable for welding plastic pipe and fittings made of HDPE, PP, PVDF and other thermoplastics material.
315-630 Semi-Automatic HDPE Pipe Butt Fusion Welding Machine/Fusion Butt Welder Workshop Machine

Technical ParametersV630
Welding Range O.D. 315-630 mm
Power Supply380V±10%, 50/60Hz ( * 3 phase, 220V )
Rated Power12.3 kw
Working Pressure Range 0-120 bar
Piston Area23.06 cm2
Temperature RangeMax. 320ºC
Packing dimension1600*1130*1100 mm
1030*720*1350 mm
800*350*400 mm
Gross Weight739 kgs

 

315-630 Semi-Automatic HDPE Pipe Butt Fusion Welding Machine/Fusion Butt Welder Workshop Machine
Basic Frame

Featured by 
- Oil seal kit, origins from Germany, make sure that the pressure performance stays in more stable way.

- 4sets quick coupling helps operator to prepare the machine better before and after welding, and we use STUCCHI which from Italy ensures no hydraulic oil leakages when unplug or plug in.

- Using integral shaft(top chromate treatment) instead of assembled shaft, ensure the chassis strength to avoid possible frame twist or deform when dragging the pipe with extreme parameters.
 

 

Heating Plate

Featured by
- We use Dupont from USA for coating of the heating plate, which is the best in industry. It's much sticker to aluminum plate, more non-sticky to plastic pipes surface. Temperature deviation of different points on heating plate is 2-3 degrees (small size machine) and 5-6 degree (big size machine). 

Trimmer

featured by
- High-quality drill, which can do 220V, 3phase as option.

Electrical box Assy.

featured by
- Temperature-controlled switch
When temperature-controlled switch is off, all the aviation plugs are not live, even the power cable connected with the power source. It is quite safe to connect or disconnect the plugs before or after welding.

- Very well-connected wires and more reasonable layout. Each wire is marked with the corresponding numbers, thus giving more convenience to do trouble shooting when a failure happens.

Support

featured by
- Ergonomic design

315-630 Semi-Automatic HDPE Pipe Butt Fusion Welding Machine/Fusion Butt Welder Workshop Machine

 

315-630 Semi-Automatic HDPE Pipe Butt Fusion Welding Machine/Fusion Butt Welder Workshop Machine
Hydraulic Power Station

Featured by
- Solid relays have a bigger load capacity and working in more stable situation, which has much longer life.

- The circuit breaker works with electricity leadkage protection switch. Including the earth wires, there're 2 elements to activate the protection when electircity is leaking.

Accumulator: Properly adjusting and installing the accumulator could gives much help to cushion the pressure when it is rising and falling. Undoubtedly it can help to keep the pressure stable for welding procedure (soaking, cooling). With the accumulator, the welding procedure will accord with the welding standard of DVS2207-1-2016 and ISO21307-2017

315-630 Semi-Automatic HDPE Pipe Butt Fusion Welding Machine/Fusion Butt Welder Workshop Machine
315-630 Semi-Automatic HDPE Pipe Butt Fusion Welding Machine/Fusion Butt Welder Workshop Machine
315-630 Semi-Automatic HDPE Pipe Butt Fusion Welding Machine/Fusion Butt Welder Workshop Machine
315-630 Semi-Automatic HDPE Pipe Butt Fusion Welding Machine/Fusion Butt Welder Workshop Machine315-630 Semi-Automatic HDPE Pipe Butt Fusion Welding Machine/Fusion Butt Welder Workshop Machine
Q&A:

1. PAYMENT TERMS

We accept 30% TT deposit and 70% balance payment against photo before delivery or 100% TT in advance.

2. LEAD TIME

Usually, we have plenty of stock for V355 and below, and keep max. 3units for V450 and V630. As to V800 and above, we'll arrange production according to the actual orders.

3. WARRANTY

2 YEARS. During the warranty period, RIYANG authorized dealer and RIYANG will totally cover the responsibility to fix the machine; Claim parts usually could be couriered to clients within 3days since receiveing the claim. Express fee will be borned by RIYANG.

4. CAN YOU DO CUSTOMIZED DESIGN

YES. RIYANG has its own design and technical team that can undertake OEM and ODM, but there are quantity requirements, please contact our sales consultant for more information, thank you.

5. CAN YOU PROVIDE TRAINING CLASS ?

1. Customers are welcome to come to our factory for 1-2 weeks of training, in addition to air tickets and hotels, RIYANG can afford meals and local transportation costs. 
2. We can also arrange for technical personnel to fly to the customer's local to do on-site training, for a period of 1-2 weeks, customers bear air tickets, hotels, catering, as well as technical training fees, please contact our sales consultant for details.
3. RIYANG offers online training in English and Spanish, which requires an appointment in advance.

6. HOW COULD BE YOUR DISTRIBUTOR AT LOCAL?

 RIYANG welcomes customers from all over the world to negotiate agency business, but for agents, we have specific requirements, details please contact our sales consultant, thank you!

You may be concerned:

315-630 Semi-Automatic HDPE Pipe Butt Fusion Welding Machine/Fusion Butt Welder Workshop Machine
315-630 Semi-Automatic HDPE Pipe Butt Fusion Welding Machine/Fusion Butt Welder Workshop Machine
315-630 Semi-Automatic HDPE Pipe Butt Fusion Welding Machine/Fusion Butt Welder Workshop Machine
    V315mm CNC Butt fusion welding machine                       V160M Plus with Data Logger                                V1000mm with Crane

 

Related Products