Automatic Chamber Filter Press with Membrane for Pharmaceutical Industry/Water Treatment

 

Product Description

Application cases in Pharmaceutical industry

Xingyuan diaphragm filter press is widely used in the pharmaceutical industry, which makes the waste water in the pharmaceutical preparation plant realize zero discharge and realize the closed-circuit circulation of water, which not only saves water resource, but also improves the resource utilization rate.

In the clean pharmaceutical dehydration section, the fast opening diaphragm filter press can reach 4-6 cycles / hour at the fastest speed. Due to the characteristics of large processing capacity, high efficiency and low operation cost, it has gradually replaced the traditional pressure filter and vacuum disc filter.
 

Automatic Chamber Filter Press with Membrane for Pharmaceutical Industry/Water Treatment
Automatic Chamber Filter Press with Membrane for Coal Industry/Slime Water Treatment

Versatile Application

Solid-liquid separation of suspensions of all kinds, prevent fruitful in a wide spectrum of industries such as petrochemical, metallurgy, pharmaceutical, light industry, food processing and textile, clay, as well as environmental protection.


Automatic Diaphragm Filter Press for Metallugy Industry

Product Parameters

The filter cake which thickness is 30mm belongs to normal product.While the thickness of the filter cake is changed,the corresponding parameter also will be modified.

Filter area: 60-160m2

Parameter:

Model

Fiter
Area
(m2)

Number
of
Plates

Contents
of Press (m3)

Thickness of Cake (mm)

Foundation
Size
Opening
(mm)

Length
of
Machine C
(mm)

Welight (kg)

XA100/1250-UB
MK

100

39

1.46

30

3695

7320

7400

XA120/1250-UB
MK

120

47

1.75

30

4175

7800

8000
XA150/1250-UB
MK

150

57

2.12

30

4775

8400

8700

XA180/1250-UB*
MK

180

69

2.56

30

5495

9120

9650

XA200/1250-UB*
MK

200

77

2.85

30

5975

9600

10300

XA220/1250-UB*
MK

220

85

3.14

30

6455

10080

10080

Note :
1.The " * " signal means midship mounting
2.the filter cake which thickness is 30mm belongs to normal product.While the thickness of the filter cake is changed,the corresponding parameter also will be modified.

Expansion device and options
Filter Pressureupto 2Mpa
Slurry Temperature≤90ºC(normal);  ≥90ºC(high)
Filter plate materialPP ;high-temperature PP
Filter Plate typesmembrane plate;CGR  plate; plate and frame
Closure systemautomated (electric hydraulic)
Control systemsstandard relay control ; PLC control
Filter cake washingwater or airblow
Plate shifting operationmanual ;automatic
Frame structureSidebar design; overhead  design
Frame materialmild steel; SS304;SS316L;mild steel with TPFE, 
Frame color As per customer request
Filtrate blowdown systemopen/under current
Feeding optionCentre feeding/ corner feeding/two-side feeding
Corrosion resistance coatingStainless steel, plastic coated, FRP coated,glass fiber coated, special paint
Expansion deviceDrip tray device
Automatic cloth washer
Automatic cake shaking system
Filter cake hopper
Filter cake conveyor
cake carts
cake chute
elevated platform
Feed pumpsPneumatic diaphragm pump, progressive cavity pump, centrifugal pump, reciprocating pump
Safety devicesplash curtain, safety guard, safety light curtains
Control panel displayText displayer ; HMI
Core Blowback SystemYes 
DCSYes 
Explosion-proof applicaiton Yes

 Automatic Diaphragm Filter Press for Metallugy Industry
 

Before and After-sale Service

Guidance for Filter Press Selection  :
         In the process of filtering, temperature, viscosity, physical and chemical characters of slurry, disposal by unit of time, moisture content of the cake, solid content in the filtrate, and effect of the cake-washing, etc will together affect  chosen of filter press type,  including area and dimension. Analogy and experimentation are used.

 please offer the bellow information:
Name of liquid Percentage of           solid and liquid(%)Specification gravity of solid State of materialPH valueSize of solid (mesh)
??????
Temperature ºCRecyclable liquid/solidMoisture content in filter cakeWorking hours/DayProcessing capacity/Dayis the liquid volatile or no
??????
 

Automatic Diaphragm Filter Press for Metallugy Industry

 

After-sale service:
1.Provide 12 months warranty period and you will have our technical suppor within the filter press lifetime.
2.Xingyuan promise to provide the spare parts within lifetime of filter press.

Workshop View

Automatic Diaphragm Filter Press for Metallugy Industry

Certificate Show

Automatic Diaphragm Filter Press for Metallugy Industry

FAQ

Frequently asked questions                                                                   
1.Q: Can you provide us the detailed drawing?
Yes, we can provide you the drawing after have made the prepayment.

2.Q: Are you a manufacturer or a trader?
We're a professional and experienced manufacturer located in HangZhou.

3.Q: Can you accept OEM?
Yes, we can produce the machinery totally according to your design standard.

4Q: How about the delivery time?
Normally 30 working days after prepayment, and we promise we will make the delivery as soon as we can.

Our Market and Customer

Automatic Diaphragm Filter Press for Metallugy IndustryAutomatic Diaphragm Filter Press for Metallugy Industry

Automatic Diaphragm Filter Press for Metallugy Industry
 

Related Products