Automatic Hatching Machine / Ostrich Egg Incubator Machine /Industrial Hatching Incubator for Ostrich Eggs

Model 5280 fully automatic incubator with three functions, one machine can realize the three functions of incubation, emergence,and nursery in one, which is convenient for management and saves investment. The machine has a fully automatic one-key mode,double heating and double humidification double systems.

Automatic Hatching Machine / Ostrich Egg Incubator Machine /Industrial Hatching Incubator for Ostrich Eggs
Model NO.               CR1232 Egg Incubator 

Size                         1300*770*1450(mm)
 

Gross weigh             130 KG
 
Power                         220W
 
Chicken                      1232pcs chickens 
 
Duck                            882 pcs duck
 
Goose                          504pcs goose
 
pigeon                         1568 pcs pigeon
 

Automatic Hatching Machine / Ostrich Egg Incubator Machine /Industrial Hatching Incubator for Ostrich EggsAutomatic Hatching Machine / Ostrich Egg Incubator Machine /Industrial Hatching Incubator for Ostrich EggsAutomatic Hatching Machine / Ostrich Egg Incubator Machine /Industrial Hatching Incubator for Ostrich EggsAutomatic Hatching Machine / Ostrich Egg Incubator Machine /Industrial Hatching Incubator for Ostrich EggsAutomatic Hatching Machine / Ostrich Egg Incubator Machine /Industrial Hatching Incubator for Ostrich EggsAutomatic Hatching Machine / Ostrich Egg Incubator Machine /Industrial Hatching Incubator for Ostrich EggsAutomatic Hatching Machine / Ostrich Egg Incubator Machine /Industrial Hatching Incubator for Ostrich Eggs

Preparation before incubation.Management during the incubation process.Humidity adjustment.
1. Before installation, the concrete floor should be kept flat, and there should be an operating space of 2 to 3 meters in front of the machine door.

2. The disinfection of the incubation room should be carried out 1 week before incubation. All corners of the incubator room must be cleaned up and fumigated with potassium permanganate and
formaldehyde.
3. Check whether the egg tray frame is firm, whether the iron wire is dislocated, broken, or bent, etc., check them one by one.
4. Check whether the hatching room is tight after it is closed, whether the walls, top, and bottom of the hatching
room are deformed, and fix any problems in time.
5. One week before incubation, the system should be checked to see if the
installation is firm and the wiring of the electrical systems is accurate and reliable.
6. Inspection during test machine. During
the test machine, the temperature, humidity, alarm, fan and other systems and the rotation of the motor should be checked.Everything is normal. The test machine can run for 1 to 2 days before the incubation. For the preparation of the hatching eggs,the selection of hatching eggs should be done first, that is, external observation, egg imaging and autopsy. Secondly, preheating
and disinfecting the breeding eggs before hatching.
1. The eggs are hatched. After the hatching eggs are placed on the plate, they are preheated and disinfected and then incubated. Insert the egg tray into the egg rack in the incubator when entering the hatch. But pay attention to the balance of the egg rack to prevent turning the eggs.

2. Temperature regulation and ventilation. After the temperature has been adjusted and fixed, generally do not move again. When the hatch is just started, part of the heat is lost due
to the opening of the door to put the eggs. At the same time, the breeding eggs and egg trays also absorb heat. The temperature in the incubator drops sharply. This is a normal phenomenon. Will gradually return to normal. Under normal circumstances, when the temperature inside the machine is high or 0.5°C low, the reasons should be checked and adjusted. Therefore, the temperature indicated by the thermometer on the door should be observed at any time. If there is any abnormality, the temperature control
system should be checked in time. Troubleshoot. As the embryo age increases, the exhaust port should be opened appropriately, and all should be opened in the later stage to maintain the oxygen demand for normal embryo development. However, it should not be
turned on too large in the early stage to avoid slow heating and waste of electricity. Generally, the temperature in the incubator is required to be about 38°C during 1-19 days of incubation. When the embryo eggs are moved into the hatcher, the temperature of the hatcher shall not exceed 37.5ºC. When using the incubator, pay attention to the temperature recommended by the incubator manufacturer's instruction manual, and consider the environmental conditions.
The most suitable relative humidity in the incubator is 53% to 57%. During the incubation period, the dry and wet bulb thermometers in the doors and windows of the incubator should be observed regularly. In addition, the water in the basin of the dry and wet bulb thermometer should be changed frequently.

(four) turn the eggs. It is required to turn the eggs once every 2 to 3 hours, and the turning angle is ±45°. If you control multiple incubators at the same time, it is best to make all the incubators turn in the same direction when turning eggs. Make a record every time you turn the egg.

Automatic Hatching Machine / Ostrich Egg Incubator Machine /Industrial Hatching Incubator for Ostrich EggsAutomatic Hatching Machine / Ostrich Egg Incubator Machine /Industrial Hatching Incubator for Ostrich Eggs
         Qingdao corich mechanical and electrical co., LTD. Is a professional supplier of industrial assembly line, the company is locatedin the northern industrial center city - Qingdao.
The company in the field of mechanical supporting products advanced design concept and high-quality personnel team, can provide customers with a full range of services.Over the years by integrating lines involving all kinds of good equipment suppliers, will disperse the advantage of resources integration, to provide customers with the most competitive overall solution: your production is expected to provide accurate solutions design, the overall equipment quotation, quality control, testing, shipment delivery,
equipment installation and debugging equipment after-sales service and maintenance, etc.
The company's products include: food and beverage production lines, slaughtering and processing production lines, packaging
production lines, commodity production lines and
All kinds of small kitchen appliances.Our products are exported to Russia, India, South Korea, Indonesia, Middle East, Africa, South America, Italy and other countries and regions."Quality excellence" is corich company's quality policy, is the direction of all staff efforts.
In line with the enterprise spirit of "diligently lasting, quickly and orderly", the company keeps exploring the exploration of squeezing out new fields.We will try our best to create value for our customers and help them become rich.We warmly welcome new and old customers at home and abroad to visit our company, guidance, cooperation, we are willing to provide you with strong support.
Automatic Hatching Machine / Ostrich Egg Incubator Machine /Industrial Hatching Incubator for Ostrich Eggs
Automatic Hatching Machine / Ostrich Egg Incubator Machine /Industrial Hatching Incubator for Ostrich EggsFAQ
Q1. What is the advantage about your company?
A1. Our company has professional team and professional production line.

Q2. Why should I choose your products?
A2. Our products are high quality and low price.

Q3. The logo and the color can be customized?
A3.Yes, we welcome you to sample custom

Q4. Any other good service your company can provide?
A4. Yes,we can provide good after-sale and fast delivery.