Automatic Pharmaceutical Water Distiller for Wfi

Automatic Pharmaceutical Water Distiller for Wfi
Product Structure
The product consists of 5 evaporator, 5 pre-heater, 5 vapor-liquid separator, 2 condenser, feed pumps, filters, control valves, flow meter, frame, piping and controller.

MOCSS316L
CapacityCustomized
Power380V

1.    Evaporator
Using tube falling film evaporation technology,to ensure Reverse Osmosis Wate(Pure water)uniform distribution in the inner wall of each evaporation tube to form a water film evaporation.
The effect of pure steam for the next evaporator to provide heat, its complete evaporation, liquefied form distilled water.
2.    Vapor-liquid separator
Using steam and water split four separation techniques(Steam and water centrifugation, underneath rotary vane clapboard separation, wire mesh capture water droplet separation, upper rotary vane clapboard separation) to ensure distilled water heat source and endotoxin content lower.
3.    Preheater
Using U-tube exchange heat, high heat exchange efficiency, good mechanical performance, long service life.
4.    Condenser
Unique double condenser design, special made   multiway reciprocating structure, heat transfer fully, no need special cooling water, distilled water can reach the required temperature
5.    Piping
Pipeline design has no storage, no dead ends, low equipment failure rate, pipeline to connect using new type sanitary clamp connection both inside and outside mirror polish, neat appearance, operate quickly and conveniently.
6.    Configuration
Adjusting valve,Automatic compensation valve,throttle valve,conductivity meter, temperature meter selected domestic and overseas high-tech products, Beautiful appearance, complete functions
7.    Water Source
The equipment required the water source must be pure water or reverse osmosis water, any natural water or city water is infeasible.Head disputation + bidirectional centrifugal separation structure enable internal , external , upper and lower centrifugal separation which produces highly saturated , high quality pure steam.
Distillation is a process for chemical and microbiological purification of raw water by gas-liquid reform and separation. In the process, water is evaporated, in which produced steam breaks away from water, and unevaporated water flowing to behind is dissolved with solids, non-volatile substances and macromolecular impurities. In the distillation process, low-molecular impurities may be entrained and carried in evaporated steam in the form of water mist or droplets, so it needs separation device to remove tiny water mist and entrained impurities, including endotoxin. Purified steam becomes water for injection after condensation. Distilling method can reduce at least 99.99% of endotoxin content.
 Description:
The industrial steam enters the evaporate shell pass through valves and interchange heat with the purified water rising film in tube pass. The purified water after heat exchange becomes vapour, then impure heat source will be removed from the vapour through diversion separation device in the machine to produce the secondary steam. The pure steam after steam-water separation will become distilled water after being condensated as heating source. Then the distilled water will enter into the condenser under the pressure differential action and then enter the storage tank through the pipe for storage. The concentrated water without evaporation and separation shall enter the next effect for re-evaporation through concentrated water inlet
Our LD multi-effect water distillator is designed and manufactured according to the criteria of GB150-1998 Steel Pressure Vessel and JB20030-2004 Multi-effect Water Distillator. All the components and parts of the equipment are made of the 304 or 316L stainless steel. The distilled water generated from the water distillator is of high purity and without heat source, which is in full compliance with all the quality indicators of water for injection stipulated in the Chinese Pharmacopoeia (2010 edition). This equipment proves to be an ideal choice for manufacturers of such pharmaceuticals as various blood products, injections, and infusion solutions, biological antimicrobial agents as well as drinking distilled water.
Distillation is a process for chemical and microbiological purification of raw water by gas-liquid reform and separation. In the process, water is evaporated, in which produced steam breaks away from water, and unevaporated water flowing to behind is dissolved with solids, non-volatile substances and macromolecular impurities. In the distillation process, low-molecular impurities may be entrained and carried in evaporated steam in the form of water mist or droplets, so it needs separation device to remove tiny water mist and entrained impurities, including endotoxin. Purified steam becomes water for injection after condensation. Distilling method can reduce at least 99.99% of endotoxin content.
Advantages
1.    Saving Steam
Steam savings, efficient use of coal resources, saving rate above 20%.
2.    Saving Water
No  need  additional  cooling  water,  save  your  precious  Pure  water (Reverse  Osmosis  Water) resources.
3.    Output water High quality
The produced water quality conductivity < 0.6us/cm, (GB ≤ 2us/cm);   bacterial endotoxin <0.125Eu/ m, (GB ≤0.252Eu / m)
4.    Output water fast
After open the machine 5 minutes, immediately produced qualified distilled water.
5.    Distilled water quality Automatic control
Intelligent Instruments continuous digital display the outlet conductivity of current distilled water, and can set the value of qualified conductivity.
Automatic switching emission unqualified distilled water.
Usage

The equipment apply to large, medium and small pharmaceutical companies to produce the Medical Pharmaceutical preparation water, injection water and so on, all levels of hospital preparation room, or chemical research institutes.
Main Features
Automatic Pharmaceutical Water Distiller for Wfi

1. This equipment is available in three types, i.e. full-automation, semi-automation and manual operation to meet the requirements of different users.
2. Water distillator with more than six effects needs not to add cooling water.
1. Multi-effect water distiller adopts unique tertiary separation technology (flash, gravity separation by 180 degrees exhumation and health type spiral separation technology), producing distilled water and pure steam with best quality, as well as safe and reliable.
2. Accelerated speed of spiral separation achieves 17 times of g (g means gravitational acceleration).
3. Unique technology of continuous removal of non-condensable gas.
4. The latest risk prevention design concept: removal of impurities in the early process stage. Seperated impurities (endotoxin, non-condensable gas and other impurities) from each evaporating column (effect) will not be brought into next column (effect), to ensure obtaining WIF with best quality;
--Residual discharge is carried out for each column, to the last column for discharge.
--Continuous exclusion of non-condensable gas is carried out for each column, rather than concentrated to condenser for exclusion.
--Impurities are excluded continuously, not intermittently.
5. All condensers, feedwater pre-heaters and first effect of evaporating column adopts double tube plate design, preventing cross contamination to the greatest degree.
6. Each effect of evaporating column is equipped with special feedwater distribution plate, which can guarantee that supply water can form falling film in the column tube, to ensure the highest evaporation heat exchange efficiency.

   
Automatic Pharmaceutical Water Distiller for WfiAutomatic Pharmaceutical Water Distiller for WfiAutomatic Pharmaceutical Water Distiller for WfiAutomatic Pharmaceutical Water Distiller for WfiAutomatic Pharmaceutical Water Distiller for WfiIf you are interested in this, please contact me: Nana Zhang
         Shanghai Medigrade Industry Co.,Ltd
         Waigaoqiao Free Trade Zone, Shanghai,China. 200137
 
 
 
         medigrade.en.made-in-china.com