Centrifugal Spray Dryer for Liquid Raw Material

LP series high-speed centrifuge atomizing drier is a special equipment and is suitable for drying emulsion, suspending liquid, liquor and so on. Particularly it has unique advantage for drying polymers and resins; Dyestuff and pigment; Ceramics, glass; Rust remover; Pesticide; Carbohydrate, dairy products; Detergent and surfactant; Fertilizer, organic compound, inorganic compound and so on.

Air is turned into hot air through air filter and heater and enter sin to hot air distributor at the top of dry chamber and then enters into dry chamber spirally and evenly, At the same time liquid of raw material is sent to centrifugal atomizer at the top of dry chamber pumped by pump through filter, In which liquid of raw material atomizes ting droplets. Air and liquid of raw material flows and contacts each other fully. The moisture vaporizes rapidly. Liquid of raw material is dried into finished product in a short time. Tile finished product is discharged through cyclone separator at the bottom of drier. The wasted air is exhausted through fan.

Its dry speed is very quick. In general, it needs 5~15 seconds. It has feature of momentary dry.
Because of raw material can be dried momentarily. Especially, it is suitable for drying thermal sensitive raw materials. It can maintain color, smell and smell of raw material.
Its operation is stable and simple. Its regulation and control is very convenient. It is easy to realize continuous operation. The distribution, fluidity and solubility of product are good.

Centrifugal Spray Dryer for Liquid Raw Material

Centrifugal Spray Dryer for Liquid Raw Material


Entry Temperature140-350ºC(adjustable)
Outlet Temperature80-90ºC
Water evaporation5 kg/h25  kg/h50 kg/h150 kg/h200-2000 kg/h
Max speed25000rpm18000 rpm18000 rpm15000 rpm8000-15000 rpm
Spray disc Diameter50mm120 mm120 mm150 mm180-240 mm
Heat sourcingElectricitySteam + electricitySteam + electricity or others
Heating power9Kw36 Kw72 Kw99 KwAccording to the actually situation
Overall size1x0.93x2.23x2.7x4.263.5x3.5x4.85.5x4x7
Final products recovery rate≥95%
Spray head driving formCompressed air driveAutomatic control

Note: the evaporated amount of moisture is depending on characteristics of raw material and the temperature of the inlet and outlet of the hot air. When the outlet temperature is 90, its curve of moisture evaporation is shown in above Fig.(for model choose reference). The specifications are subject to change without prior notice due to technology update.

Our Advantage:
1. Reliable And High Quality Drive System
Centrifugal Spray Dryer for Liquid Raw Material

2.Professional And Strong Packing
Centrifugal Spray Dryer for Liquid Raw MaterialCentrifugal Spray Dryer for Liquid Raw Material

3.Good After-Service
Centrifugal Spray Dryer for Liquid Raw Material 

4.Sale Network And Exhibition
Centrifugal Spray Dryer for Liquid Raw Material