Yantai Haige-Bar Peeling Machine
Main Technical Parameters:
|material requirement||diameter range (mm)||35|
|material length (mm)||≥2800|
|diameter tolerance||according to GB 702-2004 second group|
|roundness(mm)||≤50% of diameter tolerance|
|finished product||diameter range(mm)||35≤dia≤130|
|diameter cutting depth(mm)||1.0~5.0|
|surface roughness (Ra)||≤3.2μm|
|feeding speed (m/min)||0.3~6|
|cutting head rotation rate per minute(rpm)||240~670|
|compressed air (prepared by user)||0.5~0.8MPa,1.8m3/min,0.8 m3 up air tank with two stage oil water separator and compressed air freezing type drying machine|
Composition of Peeling Machine:
The equipment is usually composed of main machine and the table bed.
consists of bed,spindle, air/oil lubrication system,front-clamping feeding system,rear-clamping extracting system,front guide and middle-rear guide system,etc.
consists of the loader and unloader.
3.The air/oil lubrication system
The air/oil lubrication system is specially designed to lubricate and cool the spindle bearings during their highspeedrotation. It is composed of pump, oil and air distribution block and air source processing unit.
4.Cutting fluid circulation cooling system
Cutting fluid circulation cooling system consists of circulating water pump, pipeline, nozzle,etc.The cooled cutting liquid is taken by the water pump from reservoir to the nozzle nearthe cutter head through pipeline and sprays on the tools and scraps. Thus it takes away the cutting heat and drops into chip mouth with the scraps under the cutter head and flows back to the reservoir through the pipeline to be cooled again.
Chip conveyor is provided by our outsourcing supplier. The scraps falls onto the chain plate through the chip mouth under the cutter head and they are taken out by transmission and collected intensively.
consists of motor pumps, control valves, hydraulic oil tank, hydraulic pipeline etc.Clamping and loosening bars are realized through the cylinders in the front-clamping feeding and rear-clamping extracting systems.
7.The electrical system
The electrical system includes power supply system and controlling system, integrated by 1 power distribution cabinet and 1 button station,realizing the electric control of the main transmission, front- clamping feeding system, rear- clamping extracting system,cooling system, hydraulic system, conveyor and the table bed.
Yantai Haige Machine Tools Co.,Ltd was built in 1999,which specializes in producing steel finishing equipment,such as series WXC Centerless Lathe(Bar Peeling Machine),Series JY Bar Straightening Machine,Abrasive Belt Grinder(Belt Sander Polishing Machine),Drawing Machine,Shot Blasting Machine,Centerless Grinding Machine,CNC Skiving and Roller Burnishing Machine and Auxiliary Machine etc.We also engage in plating equipment and heat treatment equipment.
Based on 15 years manufacture and design experience,our machines have been exported to Russia,Vietnam,India,Pakistan,South Korea,North Korea,Taiwan Province and other countries and regions.
Factory real landscape:
We regard customer's satisfaction as our unremitting pursuit.
The first layer
wrapping with foam film and stretch film for the special components, in order to avoid moisture.
inside of plywood box, adopting small square plywood block and strapping belt to fix.
the machine itself has screw fixing holes, so it can be tightly fixed on the bottom of the plywood box through screw and nut.
in a container, by compact layout, reducing the gap between boxes to avoid shaking. At the same time, reinforcing between the bottom of the container and plywood boxes once again, furthermore using hanging steel wire protection.
Outside wooden case with export fumigation.
About Our Service:
A.Warranty period:1 year except for fast-wearing parts.
B.Immediate response when get informed of machine problem.
C.The machine operators of buyer's can be trained in our factory for free.
D.Provide long term free technical support.
E.If necessary,we can dispatch our well-trained and professional engineers to our customer's factories to help them with the machine installation and commissioning.
F.Customized design is available.OEM&ODM are welcomed.
Bright steels,Non-ferrous metals such as copper,titanium,magnesium,aluminum,Fasteners,
1.Are you manufacturer or trading company?
We are professional manufacturer and we have more than 10 years experience in this field.We have our own factory.
Besides,at the end of 2014,we was just estabilished a trading company.
2.How many employees are there in your factory?
Approximately 150 persons.
3.Do you have your own R&D team?How many design engineers do you have?
Yes,we have our own R&D team.More than 10 persons.
4.Which countries have your machines been exported to now?
Russia,South Korea,North KOrea,Pakistan,India,Vietnam,Taiwan,etc.
We regard our customer's satisfaction as our unremitting pursuit.