Corner and Butt Seam Dual Purpose Sub-Arc Welding Machine

ModelMLTW-P/J
ManufacturerWINCOO
Factory LocationSouth of Times Avenue, Liuhe Economic Development Zone, Nanjing City(211507),Jiangsu Province, P. R. China
Welding Currency100-1250A
Welding Voltage20-45V
Welding Speed200-650mm/min
Power Input380/3PH/50Hz
Rated power25kw
GrooveSquare groove/Single V groove /Lap joint
PositionFlat/Fillet weld
Full traveling speed1000mm/min
Tank Dia5.0m and above
Wire DiaΦ2.4mm-Φ4.8mm
Torch adjustment3 axis
Torch up/down adjustment±25mm
Torch fwd/rev adjustment±25mm
Capacity of flux container10Kg
Welding ProcessSAW
Plate sickness6mm and above

Corner and Butt Seam Dual Purpose Sub-Arc Welding Machine
 

  • Major Components

Tractor
The tractor is a self-propelled system, designed for the submerged arc process with track capabilities. It is self-guiding and easy to operate - only one operator is usually required.

  1. Wire Reel Capacity: 27.2kg
  2. SAW torch:  1000A, 100% duty cycle torch, Φ1.6-Φ5.5mm wire
  3. Travel speed: 0.12-1.0m/min

Magnetic Roll System for outside fillet seam of tank
Power Source and Wire Feeder
The standard welding equipment supplied is the Lincoln NA-3S welding control and NA-3S weld head fitted with nozzle and wire rolls. Wire reel(23kg)will be supplied with equipment too.

  1. Power source MILLERDC1250

      1. Model: DC1250
      2. Rate Output: 1000A at 44VDC, 100% Duty Cycle
  2.  welding Control
  3.  Wire Feeder
  1. Wire Diameter: Φ2.4-4.8mm
  2. Feed Speed: 0.5-10m/min

Cable Assemblies

  1. Welding Cable 150mm2×50m
  2. Control Cable 10p×2.5mm2×50m
  3. Ground Cable 150mm2×5m

Corner and Butt Seam Dual Purpose Sub-Arc Welding Machine
Corner and Butt Seam Dual Purpose Sub-Arc Welding Machine
Corner and Butt Seam Dual Purpose Sub-Arc Welding Machine
Corner and Butt Seam Dual Purpose Sub-Arc Welding Machine
Corner and Butt Seam Dual Purpose Sub-Arc Welding Machine
Corner and Butt Seam Dual Purpose Sub-Arc Welding Machine
Corner and Butt Seam Dual Purpose Sub-Arc Welding Machine
Corner and Butt Seam Dual Purpose Sub-Arc Welding Machine