Double Pulse Gas-Shielded Welding Machine (with MMA Mode; SYNC MIG; TWIN Pulse and Pulse MIG function)

Double Pulse Gas-Shielded Welding Machine (with MMA Mode; SYNC MIG; TWIN Pulse and Pulse MIG function)
PARAMETER / SPECIFICATION  --- Double Pulse Gas-shielded Welding Machine(with MMA Mode;SYNC MIG;TWIN Pulse and Pulse MIG function)

BASIC INFO 

MODELNBM(MIG)-200Rated load succession rate35%
Rated input voltage220V±10%Power factor COSφ0.73
Rated input current (A)35AEfficiency η85%
Rated output capacity7.7KV.AOutline dimension (mm)490*220*375
Output no-load voltage (V)69VNet weight (kg)13

Unitary gas shielded arc welding parameters(SYNC MIG)

MODELNBM(MIG)-200Burn-back time (Burn)-90%~90%
Rated input current (A)60-200ATime for spot welding (Sptt)0.1~9.9s
Material selectionFe Co2,Fe Ar82,AlMg5 Ar,
AlSi5 Ar,E308 Ar98
Soft Starting Speed (StFd)1~13m
Welding wire diameter (DIAM)0.8,1.0 ,1.2Spot welding stop time (Stop)0.1~25.5s
Operation mode (TRIG)2T,4T,S2T,S4T,Spot,CpotPreflow time of gas (Freg)0~10s
Inductance (Forc)-90%~50%Postflow time of gas (Post)0.1~50s

Double pulse gas shielded arc welding(Twin Pulse)

Rated current (A)20-170ADuty ratio (Duty)20%~80%
Material selectionAlSi5 Ar,AlMg5 Ar; Fe Co2,Fe Ar82,
E308 Ar98
Pulse amplitude (Ip-p)5%~50%
Welding wire diameter (DIAM)1.0,1.2; 0.8,1.0Basic arc length (PU)-50%~50%
Operation mode (TRIG)2T,4T,S2T,S4T,Spot,CpotPeak arc length (BU)-50%~50%
Inductance (Forc)-90%~50%Soft starting speed (StFd)1~13m
Burn-back time (Burn)-90%~90%Spot welding stop time (Stop)0.1~25.5s
Time for spot welding (Sptt)0.1~9.9sPreflow time of gas (Freg)0~10s
Pulse frequency (Freq)0.1-5.0HPostflow time of gas (Post)0.1~50s

Single pulse gas shielded arc welding(Pulse MIG)

MODELNBM(MIG)-200Burn-back time (Burn)-90%~90%
Rated current (A)20-170ATime for spot welding (Sptt)0.1~9.9s
Material selectionAlSi5 Ar,AlMg5 Ar; Fe Co2,Fe Ar82,
E308 Ar98
Soft starting speed (StFd)1~13m
Welding wire diameter (DIAM)1.0,1.2; 0.8,1.0Spot welding stop time (Stop)0.1~25.5s
Operation mode (TRIG)2T,4T,S2T,S4T,Spot,CpotPreflow time of gas (Freg)0~10s
Pulse amplitude (Ip-p)-90%~50%Postflow time of gas (Post)0.1~50s

Coating manual welding parameters(MMA Mode)

Rated input current (A)20-180AArc-initiating time (HOTT)0~99ms
FORC0~205Arc characteristics (SLOP)Cc constant current mode ;
Cp constant power mode;
1~20A slow-decrease characteristic
Arc-initiating current (HOTI)0~160AVRDON/OFF

TIG mode

MODELNBM(MIG)-200VRDON/OFF
Rated input current (A)1-200APost0.1~50s

 Double Pulse Gas-Shielded Welding Machine (with MMA Mode; SYNC MIG; TWIN Pulse and Pulse MIG function)
 

Double Pulse Gas-Shielded Welding Machine (with MMA Mode; SYNC MIG; TWIN Pulse and Pulse MIG function)
MAIN FEATURE

Mig-200  digital double pulse welding machines apply to welding methods including MMA, MIG/MIX, PULSE AlMg, PULSE AlSi and DOUBLE PULSE. MASTER-MIG DPP series welding machines are suitable for welding materials including carbon steel, stainless steel, aluminum-magnesium, aluminum-silicon and flux-cored wire.

Its characteristics include no-spatter, uniform weld pool, etc.

Double Pulse Gas-Shielded Welding Machine (with MMA Mode; SYNC MIG; TWIN Pulse and Pulse MIG function)
CHARACTER

Use full-digital control system to realize precise control and stable arc length during welding. 

Use full-digital wire feeding control system to realize precise and stable wire feeding.

With built-in welding expert database, the system can be used to realize automatic intelligent
parameter combination.

CHARACTER

Friendly operation interface, unified regulating mode, easy to master.

Perfect single pulse and double pulse functions, minimum welding spatter and good-looking appearance of weld.

The special four-step function is suitable for welding metals with good thermal conductivity, and the welding quality is perfect during the arc initiating and extinguishing.

Double Pulse Gas-Shielded Welding Machine (with MMA Mode; SYNC MIG; TWIN Pulse and Pulse MIG function)
Energy saving and high efficiency: Less power consumption, Environmental protection.

The pulse current, base current, pulse frequency and pulse width are independent and adjustable.

The welding current are highly stable so that all ferrous metal, copper, aluminium and stainless steel can be welded comprehensively.

Advantage: Excellent weld joint, little splash and low noise.

Methods: Touch Arc Starting; High frequency Laser-Arc

Speciality: Minimum current. The minimum current is 5A, which is a perfect protective way to the weldors.

  
Real PICS

Double Pulse Gas-Shielded Welding Machine (with MMA Mode; SYNC MIG; TWIN Pulse and Pulse MIG function)
Double Pulse Gas-Shielded Welding Machine (with MMA Mode; SYNC MIG; TWIN Pulse and Pulse MIG function)

This type of welders are reliable, durable, portable and easy to use, which are suitable for the industries including mining, architecture, maintenance and decoration, etc.

WELDING EFFECT

Double Pulse Gas-Shielded Welding Machine (with MMA Mode; SYNC MIG; TWIN Pulse and Pulse MIG function)
WORKSHOP
Double Pulse Gas-Shielded Welding Machine (with MMA Mode; SYNC MIG; TWIN Pulse and Pulse MIG function)

SOME WORDS I WANNA TALK TO YOU:

TIG SPECIALIST! We've been focusing on the researching and manufacturing of TIG welding machine over 10 years! We undderstand his is a niche market, yet we've been always stick to our initial intention, that is providing the best TIG welder to every clients of us! 

10 years of persisting in TIG welder, we've been encountered so many troubles and difficulties. There were so many times we want to change our plans and goals, we've been struggling and shaking, yet finally we make it. We still here, still stick to TIG welder. Now we are enjoy great reputation in this industry over China, and we are cooperate with many great brands in China. Now we want to step off China, we want to provide our product and service to you, whom are far away from us, whom are live at different place in the world.

Double Pulse Gas-Shielded Welding Machine (with MMA Mode; SYNC MIG; TWIN Pulse and Pulse MIG function)
 

Related Products