Electric Mill Roll Stand Machine for Corrugated Board Production Line

Product Description

Specification:

Working Width

YK-1400SFL

1400mm

YK-1600SFL

1600mm

YK-1800SFL

1800mm

 
Heating methodSteam heating
Design speed100-120m/min
Economical speed80-100 m/min
Compress-air pressure0.4-0.9MPa
Flute typeStandard fluteUV Flute
single facer lineStandard spec.A,B,C,E,F
 For other types and models, we can produce as customer's requirements.

Electric mill roll stand
Structural features:

1, Symmetrical structure can also install two bundles of paper at the same time, Paper can be used for non-stop for a job; Adopts mechanical drive to complete the paper clamping, lifting, loosen, move on, around translational motion, etc.

2, each shaftless mill roll stand is equipped with two pieces of paper guide, two sets of the paper car; paper guide the use of channel 14 and the guide post-weld, paper car adopt 10mmwelded stell, the length of the track is 4500mm.

3, manual disc brake, add screw following

4, electric elements centralized control the electric elements, expand chuck.

 

Technical parameters:

1, Back stands action mode: mechanical electric operation

2,the range of paper jams:maximum:1600mm    minimum:600mm

3, the diameter of paper jams:maximum:¢1400mm    minimum:¢400mm

4, Unilateral maximum load:maximum2000Kg

5, Powered motor parameters:

Paper jams motor550W×4set  380V    50HZ short(S2)working standard

lift motor 1.5Kw      380V    50HZ  short(S2)working standard

Electric Mill Roll Stand Machine for Corrugated Board Production Line
Electric Mill Roll Stand Machine for Corrugated Board Production Line

Related Products