1)The rotary drying machine is composed of stove, main rotary body, which reduces the moisture from 60% to 10%. The moisture evaporating capacity of our rotary drum dryer can reach to (250kg per hour to 8000kg) per hour. Different density materials, the final product are not the same; Also for different moisture of raw materials, which could get the different final capacity.
2)It is suitable for dryingsensitive material like sawdust, rice hull, milledwheat straw, milled cotton / corn stalksand so on.
3)It is made up of heat stove, tube, impulse jar, function tube, fan, and cycloneseparator.
4)It can reduce moisture from 40-45% to 8-12%.
Fuel for the furnace: wood waste, coal. Waste oil and so on.
(Note: If the moisture of raw materials is more than 45%, the furnace required the bigger, please inform us when ordering.)
1). Air heating system is able to allow highly efficient removal of water from fresh harvested forage, and the maximum durability of dehydrated forage.
2). Non-pollution to the target materials guarantees minimal loss of their color, favor, and nutritional ingredients;
3). Smoke collector working with the air heating system adopts water-recycled wet-type collecting method, and ensures the exhausted gas to satisfy the environmental protection requirement as well as the lowest water consumption.
|Final Drying Moisture||10%-15%|
|Drying Pipe Diamet||300MM|
|Direct Hot Wind Stove Size||2000*1000*1300MM|
|Fuel (firewood) Consumption||100-120KG/H|
Principle of Wood Dryer
The wet materials are conveyed to the hopper through the belt conveyor or bucket elevator, and then enter into the feed end through the hopper charger and the feeding pipe in sequence. The inclination of the feeding pipe must be greater than the natural inclination of materials in order to make the materials flow into the dryer smoothly. The dryer cylinder with slight inclination with the horizontal line.
The materials enter from the higher end, and the heat carrier enters from the lower ender; The two contact each other from opposite directions, but there are also circumstances that the heat carrier flows into the dryer body together with the material. Along with the rotation of cylinder, the materials run to the lower end due to gravity. In the forward movement of wet materials in the dryer body, the wet materials are heated directly or indirectly by the heat carrier to dry the wet materials, and then the materials are discharged from the discharge end through the belt conveyor or screw conveyor.
Packing & Delivery
We also produce wood pellet production line.complete biomass wood pelleting plant manufacturers is the process of making waste materials into solid fuel. The biomass pellet mainly used for fuel.If you want to get more detail,Welcome to contact us .
(1). What is Your Raw Materials or Tell Us Your Materials Moisture Content?
-----Different moisture content of your raw materials, with different size of Rotary Drum Sawdust Dryer for you.
We need to know what is your raw materials, moisture content of it? and final capacity demand?
(2).What is Your Fuel for Rotary Drying Machine?
-----There are kinds of biomass could be Fuel for Rotary Drying Machine, if you have special demands please let us know. Like: Automatic Feeding Fuel for Rotary Drying Machine or not?
3).Rotary Drying Machine Adjustable Items:
-----Feeding Heat Temperature Could Adjustable, Rotation Speed Adjustable.
All according to your raw materials information, moisture content and capacity demands.