The traditional squeegee is all urethane rubber, which is printed for a long time,After the squeegee absorbs the solvent in the ink, the hardness is reduced, the expansion deformation, the printing angle α is unstable, and it is not suitable for precision screen printing. The Fiber Glass Board Squeegee is combined with the glass fiber board and the scraping glue, which has the elasticity of the scraping rubber and the support line of the glass fiber board. The long-time printing can maintain a stable printing angle and the printing ink thickness is uniform.
Size and hardness
Different hardness corresponds to different colors
| Polyurethane squeegee type M|
MADE IN JAPAN
|Cyan-62±3|| Hardness Tester|
Polyurethane rubber made in Japan
|Project||Unit||Squeegee type M|
|colour||Cyan 62A||Green 70A||Blue 75A||Yellow 83A|
Chemical solvent resistance
Test time: 7 Days
Test solvent: xylene, methyl ethyl ketone
Test items: hardness change, quality change
The high quality fiberglass board has uniform thickness, good elasticity and chemical resistance.
1.Store indoors at 40ºCor lower, do not store in high temperature and high humidity, direct sunlight and ultraviolet radiation. (Recommended storage conditions: 23ºC±2ºC, humidity 60% or lower)
2.Do not store near heat-generating equipment or dusty places.
3.It is forbidden to bend and press, stack it straight, stack no more than 20PCS.
4.The scraping rubber is stored at a low temperature for a long time, and can not be used immediately after being moved to the workshop. It should be placed at 25ºCfor more than 3 hours before use.
Packing and Shipping
1.export carton or as your request
2.Small quantity shipped by courier. And large quantity shipped by air or by sea as your request. Or shipped to your forwarder in China