A. For paper width up to 3000mm to make bathroom tissue, kitchen towels and industrial rolls up to 300mm diameter. Equipped with variable perforation length system to satisfy any length need. The speed of this rewinder is up to 250m/min, 5 cycles per minute, including:
Two steel to rubber or steel to paper embosser units.
Two or three backstands, with a double or three belt driving system, for jumbo rolls up to 1200mm diameter, and with a pneumatic loading of jumbo roll system.
B. This CIL-SP-A-A Economical line will automatically change logs and unload the finished products, and automatically trim and seal the tails of the logs, leaving a lip about 20mm to make it easy for consumers to start using the rolls without tearing the paper at the seal.
C. All the driven system to be by means of timing belts, nylon belts and gears, for years
Of free maintenance. Electrical eyes will be mounted on the different parts of the line to monitor the machine and stop it in case it runs out of paper, cores or any other unforeseen problems. The lubrication systems will be provided on the major parts of the line.
D. The motor power is 7.5kW. Variable frequency control depending on the final specifications and requirements.
E. This line is to be controlled by a PLC of your choice.
|Parent roll width||1500mm - -3000mm|
|Parent roll diameter||Up to Φ 1200mm|
|Core inside diameter of parent roll||Φ3"( 76mm )or as requested by customer|
|Machine speed||150 -300m /min depending on model|
|Operating speed||150 -250m /min, 5 cycles(logs)/min|
|Finished roll outside diameter||Bathroom tissue: Φ80 -150mm|
|Finished roll outside diameter||Kitchen towels:Φ80 -150mm|
|Perforation pitch||Variable, any size needed|
|Sheet count||Increments of one sheet|
diameter of finished rolls
|Converting web||1 or 2 ply, 15-30 gsm|
|*Other specifications are available to your requirement |
|CIL-ZH-280 Automatic cutting machine|
|Log length||1500mm - 2700mm|
|Log outside diameter||Φ90 -150mm|
|Cutting length||Servo drive for any cutting length|
|Machine speed||100 cuts/min, 2 rolls/per cut|
|Operation speed||90 cuts/min, 2 rolls/per cut|
|Blade outside diameter|
|Installed power||2 AC motors:1x1HP, 1x2HP|
|Voltage||As required by custom|