Fully Automatic Facial Tissue Paper Production Line Converting Machine with Auto Separator

Fully Automatic Facial Tissue Paper Production Line Converting Machine with Auto Separator 
Fully Automatic Facial Tissue Paper Production Line Converting Machine with Auto Separator
Fully Automatic Facial Tissue Paper Production Line Converting Machine with Auto Separator

Outline:
Automatic facial tissue production line is consist of facial tissue folding machine, log saw cutting machine, single bag packing machine. Machine working smoothly and stable from the raw material to  finished products. This production line is of high degree of automation, save labor costs, reduce labor intensity, is the best choice of the production of tissue products. 

Machine modelMachine configurationOutput produce
CS-180/2-14L facial tissue folding machine
 
  1. Jumbo roll width 400mm~2800mm 
  2. Jumbo roll diameter:max 1100mm
  3. PLC computer programming 
  4. Unfold paper:180*200MM
  5. Fold paper:90*200MM
  6. With embossing unit
  7. With edge-embossing unit(can be chosed)
(800~1000)*14*60*8
=5,376000~6,720,000pcs
 
Facial Tissue Auto Log Separator 8-10 logs per minute  
DHX-150 log saw cutting machine Design speed: about 150cuts/min

  1. Operating speed: about 120cuts/min
 
T80SD automatic facial tissue packing machine
 
  1. Packing materials:plastic bags
  2. Packing speed:30~60bags/min
 
Belts conveyorTo connect the log saw cutting machine with packing machine 

                           

1. CS-180/2-14L Box Drawing Facial Tissue Machine

    Main features:
    CS1802-/14L facial tissue making machine working flow :The jumbo rolls which have been slit into the desired width are cut by the slitting cylinders,and then interfolded into interoverlapped rectangular facial tissue sheets.This machine adopts independent servo motor drive ,and automatic paper tension control. It features of high speed ,nice folding and easy operation .

  1. Can order steel to rubber embossing rolls,pneumatically separated.

      2.Wallboard rack and Machine running stability and extremely good and fast.
      3.Pneumatic jumbo roll loading,pneumatic paper driving ,stepless speed additionustment ,and web tension control.
      4.Equipped with roots type vacuum pump for stable running of the machine
      5.Make various products width as requirement .
      6.Equipped with edge embossing unit to keep the two plies together.
      7.The machine will stop when the paper broken.It avoid waste caused by  no paper or paper broken.
      8.The web can be threaded on the machine by the two jog buttons,It's more safety and easier to thread the web.
Fully Automatic Facial Tissue Paper Production Line Converting Machine with Auto Separator
    Main technical parameter:

Machine model         CS-180/2-14Lmm
Finished products unfolded size180*210mm±2mm
Folding products size90*(120-210)±2mm
Raw material width   400-2800mm
Raw material diameter1100mm
Raw material core diameter76.2mm
Out put (8 hours)8000~10000Kg
Embossing unitSteel to paper or steel to steel, Steel to steel edge embossing ,independent pneumatic regulation
Power7.5KW Main motor
3.0KW(2set) Unwind motor
Vacuum suction unit47KW Fan 
Pneumatic system3 HP air compressor ,mini pressure 5kg/cm2PA
Driving systemTiming belt
Dimension8700X3500X7000mm
Weight12~13T

2. Facial Tissue Auto Log Separator

  1. Under the condition of standard extraction number 130 and standard layer number 3,The efficiency can reach 8-10 logs per minute. When leaving the factory, the machine will be adjusted to 8 rolls/min,If there is any special requirement for speed, it should be informed in advance. After the speed is fully adjusted, the customer cannot raise or slow down the speed unilaterally,The related operation can only be completed with our assistance
  2. When changing specifications, if only the amounts of paper and the weight of paper are changed, but the packaging thickness of the paper is not changed, the number of paper can be set on the touch screen without adjusting the mechanical parameters. However, if the paper packaging thickness is changed, the related mechanical structure needs to be adjusted. The whole process takes about half an hour.
  3. The thickness of the paper that the standard machine can adapt is 50--110mm. If the thickness of the paper is less than 50mm or more than 110mm, it needs to be customized.
  4. The standard machine can accommodate a width of 75-110mm (or 150-220mm). If the width is less than 75 (or 150) or greater than 110 (or 220), it needs to be customized.
  5. When leaving the factory, all of the mechanical and electrical parameters in the case of customers no special requirements, all will according to the standard width to adjust (for example, the machine of 9 lines, is 1.8 meters in length, standard, then, all of the mechanical and electrical parameters in the case of customers no special requirements, all can adjust by the standard of 1.8 meters) if the customer wants to change the width of paper, for example by 1.8 m to 1.5 m, then the changes will be bigger, almost had to spend four hours. But When the range of 40mm changes (for example, the current width is 1.8 meters, so when the paper width changes between 1.84m  and 1.76m), no adjustment is required.
  6. Paper separating deviation: +/-2draws
  7. Power Supply:AC380V   Frequency:50HZ; Power:3KW;  Air Pressure:0.6---0.8MPa; Gas Consumption:1.5m³/min;   PLC,Servo Motor,Servo Driver,HMI are all Siemens brand. 
Fully Automatic Facial Tissue Paper Production Line Converting Machine with Auto Separator

3. DHX-150 single Channel log saw cutting machine

The whole machine adopts servo drive technology and frequency control of motor speed and enhance the stability of paper cutting, and improves the cutting precision of tissue and to cut off the end face flat . Cutting length within the scope of the machine allows arbitrary adjustable. Fixed automatic knife grinding wheel Angle, ensure the quality of the sharpening knife. Knife grinding place often blow compressed air for cooling, and can match the special cooling fluid.
Fully Automatic Facial Tissue Paper Production Line Converting Machine with Auto Separator
Main technical parameters

The length of the none cut off facial tissueminimum 500mm
The Height of tissue30~130mm
Design Speed 150cuts/min
operating speed120cuts/min
Round blade outer diameterΦ610mm
Finished products specification 70~300mm
Paper width70~110mm
Cutting Length70~300mm
Left-over Length 20~65mm
Power 11KW
power supply380V 50Hz
Air source0.5~0.8MPa
Machine Size4600*1700*2500mm
weight of machine 2300~2600kg
brakeParameter setting (auto/manual)
Stepping sharpening knifeParameter setting (auto)
Pneumatic sharpening knifeParameter setting (auto/manual)
                           

4. T80SD Automatic Facial Tissue Packing Machine
Technical SpecificationsDescriptionRemark
Scope of application Facial tissue, hand towel,napkin tissue 
InfeedASF Full automaticFive sections of intelligent flexible feeding mode
Max.design mechanical speed≤  80 bags/minRelated to specification of packing
Max. stable speed  65 bags/minRelated to specification of packing
Tissue length range (finished product)  120 mm-210 mm
Over this size can be customized
Tissue height range(finished product)  40 mm-100 mm
Tissue width range(finished product)  90 mm-105 mm
Machine sizeL*W*H= 4600 *3620 *1770  mmStandard size
Machine weight About   3T
 
 
Packing raw material
 
CPP film 
Film Thickness0.04mm-0.055mm 
Max film diameter   400 mmOver this size can be customized
Film core diameter76mmIn accordance with international standards
Max film width340mmOver this size can be customized
Air pressure Minimum air pressure  5MPA  
 
Equipped by user
Power supply380V/50HZFollowing China's electric power standard
Total drive power   4.8 KWThe sum of main motor, servo motor, Sum of speed regulating motor power
Total heating power    4.6 KWSide seal, side sealing part of heating power combined
Voltage variation+/-10%In accordance with international standards
Packing formatThree-dimensional wrapvertical sealing first and then two side sealing 

Fully Automatic Facial Tissue Paper Production Line Converting Machine with Auto Separator

About Us: 
Quanzhou Jingyi Machinery Co.,ltd is professional manufacturer for paper machines: 
1) Toilet Paper Machine and kitchen towel machine (1.2m--2.8m width of jumbo roll);
2) Facial Tissue Machine (2-14 lanes);
3) Napkin Paper machine;
4) Hand Towel Paper Machine;
5) Handkerchief Paper Machine;
6) All kinds of Paper Cutting and Packing Machine. 

Our Workshop: 
Fully Automatic Facial Tissue Paper Production Line Converting Machine with Auto Separator

About the package and shipping: 
Fully Automatic Facial Tissue Paper Production Line Converting Machine with Auto Separator
Our Service:
Pre-Sale Services: We will reply your inquiy within 24 hours. According to your actual situation and budget, we will provide professional consultation and best solution with strong technical support.
After-Sale Service:
1.We will send the engineer or technician to your factory for installation, debugging and training the workers. Also welcome you come to our factory for learning the machine operation.
2.Warranty: One year guarantee, service for ever. Our technical team will give you 100% rest assured global presence service if necessary.
3.Wearing parts of machine will be sent to customers with a good preferential price.

Contact Us:
Quanzhou Jingyi Machinery Co.,ltd 
Add: Jiangnan Street,Licheng District, Quanzhou,Fujian
Name: Martin Wu
Mob/ : 0086-13615946593

Related Products