High/Middle/Low Carbon Steel Wire Drawing Machine for Nail Making/ Welding Wire/Welding Electrode/Wire Mesh/PC Wire

BEEST----WIRE EQUIPMENT&SOLUTION

Servo Motor Drive Drawing Machine
High/Middle/Low Carbon Steel Wire Drawing Machine for Nail Making/ Welding Wire/Welding Electrode/Wire Mesh/PC Wire

1.Performance and case sharing

Servo direct drive technology pioneer, leading technology, the world's first, the cumulative production of direct drive wire-drawing machine more than 500 sets, more than 5000 direct drive motor!
 

2.Machine feature

2.1 Servo motor drive directly

2.2 Servo motor connect capstan directly

Without gear box ;    Without transmission belt ;     Without mechanical break  .

Comprehensive energy saving 10%-20%

2.3 Twins design

    • Two machine can be installed , operate, and maintain back to back 
    • Twins take up spooler, motor is at inner side
    • Save land  50%
    • Saving infrastructure   
    • Save supporting facilities

2.4 Plug and play:

The electrical cabinet and machine is integrated
The control panel is on top of electrical cabinet
 

2.5 Checking temperature of bearing of motor:

Checking the temperature of up and down bearing of motor ,Showing the temperature on time,Making alarm and stop machine for over temperature
 

2.6 Motor and electrical cabinet is cooled by cooling water:

    • set independent soft water tank, motor and electrical cabinet is cooled by closed cooling water circulation.
    • anti-dust electrical cabinet.No deposit, no block on pipe of cooling water for motor.

2.7 special treatment on inner side of motor:

anti-water, prevention of moisture condensation
Preventing damage of motor due to over temperature
 

2.8 Capstan:

    • Adopt bongrace type, avoid drawing powder drop into water plate from gap between frame and capstan
    • Capstan is dynamic balanced

2.9 Die Box:

    • Pressure type die + rotating die+ powder stirrer
    • Pressure type die +powder stirrer
    • Forced lubricant,take enough powder on wire surface

 

2.10 Dust collection system (option):

Can take out drawing powder dropped on frame, it is also helpful for cooling wire
 

2.11 Cooling water flow check:

Equip cooling water counter meter, check cooling water flow accurately
 

2.12 ID register:

Equip ID register device, to run machine, operator should register first. So machine can count quantity of production according to operator

 

2.13 Spare parts is module design:

Standardization of components,Splicing of components,easy maintain
 

2.14  Energy conservation and environmental protection

Comprehensive energy saving of 10%- 20%

Direct drive environment is quieter

Seal + own dust removal system
 

2.15  Internet of Things

3.Water and electrical configuration requirements

 

power supply 380±10%,50HZ, three-phase five-wire (ground reliable grounding), power configuration and cable specifications as shown in the basic diagram   380±10%,50HZ.
air supplyPressure ≥ 0.5 MPa
cooling waterPressure ≥ 0.08mpa, water temperature ≤25ºC

 

High/Middle/Low Carbon Steel Wire Drawing Machine for Nail Making/ Welding Wire/Welding Electrode/Wire Mesh/PC Wire
High/Middle/Low Carbon Steel Wire Drawing Machine for Nail Making/ Welding Wire/Welding Electrode/Wire Mesh/PC Wire
High/Middle/Low Carbon Steel Wire Drawing Machine for Nail Making/ Welding Wire/Welding Electrode/Wire Mesh/PC Wire

High/Middle/Low Carbon Steel Wire Drawing Machine for Nail Making/ Welding Wire/Welding Electrode/Wire Mesh/PC Wire