Industrial Metal Plate & Tube CNC Flame Plasma Cutting Machine 120A with Rotary Axis 1500*3000mm
CNC Control system ( STARFIRE, Beijing, China, Supports both plate and tube cutting )
1. LCD, English display. Has the notes of each operation button on the bottom of displayer in time, so just needs short training, then the buyer can do independent operation, more convenient and easy to use.
2. Powerful anti-interference ability, moving stable and convenient.
3. With cutting compensation function, setting the required workpiece size in computer, nesting and output, can adjust the slotting size in the control system according to needs, easy and efficient operation.
4. Memory function after power failure and break point, no matter power failure or arc breaking during cutting, all can continue go forwarder or back-off following the cutting track.
THC( Torch Height Controller, HYD, China )
1. With high sensitivity THC, auto adjusting the best cutting distance, ensuring the workpiece accurately cutting.
2. The torch has auto torch height controller, during cutting, the torch always keeps the same distance with the plate, extend the nozzle's life time, and get the high quality cutting effect.
3. Good anti jamming capability, stable performance
Z-axis plasma & flame dual cutting head(With anti-collision system and infrared positioning system for Z-axis)
1. Z-axis is lead ball screw transmission type, high speed, convenient maintenance,suitable for all kinds thickness of plates.
2. Can auto adjust the cutting distance for uneven plate, ensuring the same distance between the torch with plate, ensuring the cutting quality.
3. Special torch height controller can prevent the torch crash the plates effectively, protect the torch and long time using.
4. With anti-collision device, during the cutting, if torch crash accidentally, the machine will stop immediately, avoiding breaking the machine and thin plates is whiled away due to the cocking.
5. With infrared positioning system for cutting Z-axis
Motor & Drive ( China ChuangWei stepper motor 86BYGH450A and stepper driver Yako 2608)
1. Adopting China famous Chuang wei brand stepper motor and Yako stepper driver, stable performance, high response speed, good anti jamming capability.
2. All the machine's signal wire is high flexible shielded wire, heat resistant, low temperature resistant, bend resistant.
3. Control signal uses 24V voltage, with famous brand switch power supply.
Machine bed part
1. The whole machine bed adopts heavy duty welded steel structure and then precision-machined, whole tempering, fully eliminate welding stress, stable and reliable performance. Heavy square ssteel tube welded gantry, improving stablity & moving precision.
2. Dual driving for Y-axis, XY-axis adopts high precision linear square guide rail, Hiwin, Taiwan, good oriented, high precision. Transmission is high precision helical rack and pinion, customized by the specialized manufacturer, surface carburizing quench, stable moving and high precision.
3. Dust proof system on the gantry, effectively prevent the dust going into guide rail and rack during cutting, extend the machine life time, also make machine more beauty,
4. Special fume dust extractor,and down draft cutting table and slag storage device, create a good working environment.
5. Tool type cutting blade with feeding wheel, better for cutting.
6. Water table structure( cutting on the front of water), remove the smoke, create a good working environment.
1. Austria FastCAM automatic programming and nesting software
2. Auto programming, parts generated and nesting softare professionally drawing and cutting control With the post processor for graphic transformation and nesting.
3. Realizing the edge-shared nested during cutting, saving time and materials.
Plasma Power Supply
Adopting China Huayuan LGK-120IGBT 120A plasma power supply, cutting ability 0-20mm
Rotary axis for tube cutting: diameter 200mm, length 3000mm, reduction gear transmission
|Rotary axis||diameter 200mm, length 3000mm, reduction gear|
|Material||Heavy duty strong welded square steel tube structure for whole machine|
|Control system||STARFIRE( for both plate and tube cutting)|
|THC( torch height controller)||THC( HYD, China)|
|Plasma power supply||China Huayuan LGK-120IGBT(120A)|
|Cutting head||Plasma & flame double torch|
|Cutting speed||Adjusted according to material's thickness|
|Working table||Thickness tooth type cutting blade with water table|
|Guide rails||Linear square guide rail ( Hiwin, Taiwan, diameter 20mm)|
|Transmission||Helical rack and pinion transmission for XY-axis, lead ball screw transmission for Z-axis|
|Driving system||Stepper motor(86BYGH450A, CW) and |
Stepper driver (Yako 2608)
|Power supply||AC 380V, 50/60Hz, three phases|
Suitable for nonferrous metal sheet, stainless steel plate, carbon plate, aluminum plate, galvanized plate, white steel plate, titanium plate, etc materials automatic cutting.
Application: Metal processing, machine manufacturing, auto spare parts, ventilate environment protection, steel structure shipbuilding electrical product's shell processing, advertisements and signs, decoration, iron art garden, auto making, ship's electrical parts& plates cutting.
CNC plasma cutting machine has solved problem for follow-up processing for small holes after cutting plates, economic, energy conservation and environment protection, high improve the working efficiency, lowing the processing cost, has the ability of combine machining, fully effective the machine performance.
Reference Working Videos
For more information, just feel free to contact us!
Jinan Upgoal Mechanical Equipment Co.,Ltd
CNC Router/Laser Engraving Cutting Marking Welding Machine/Plasma Cutting Machine