Laminating Honeycomb Board Machinery for Paper Pallet

Product Description

1.Production introduction

Wuxi Shenxi Honeycomb Machinery Factory, supplies honeycomb paperboard lamination line. Honeycomb lamination line makes the honeycomb paperboard from 8 to 100mm thickness automatically.  It can make 5000-8000 m2/ shift
Laminating Honeycomb Board Machinery for Paper Pallet


2.1 The paperboard cutting unit uses two servo motors & ball screw system to make it synchronized and cutting. Tolerance within 2mm/ m.
2.2  Belt press unit, worm screws adjust the height of upper press unit continuously and stable. The pressure can be adjusted by springs continuously.
2.3  Hot air circulation in the oven, increase the thermal efficiency. 
2.4  Safety control system according to CE regulations.
2.5  Paper will avoid the gluing roller while machine stops, easy to do the adjustment when machine's on. 
2.6 Apply glue on paper or honeycomb, both available.
2.7 Heating: steam, electricity, Hot oil all available.
3.Process of honeycomb making
Paper unwind---honeycomb expand---glue applying---- Laminate and belt press---hot    board heat----Belt press again---Board oven--- cold press----trim (optional)--- cross cut.
4.Technical data 

No.ItemHF(B)-1300  HF(B)-1450HF(B)-1600
1 Thickness of honeycomb paperboard8-100mm
2Maximum width of paperboard (mm)130014501600
3Cardboard cutting precision+-2mm
4Length of honeycomb paperboard(after cutting)>=500mm
5Applicable paper 180-420gms cardboard paper or Kraft paper
6Layer of face paper1
6Maximum designing speed20m/min
7The actual production speed6-12m/min.(According to the paper dry degree,Glue quality,paper core thickness,Local humidity and other factors to change )
8Heating drying methodelectrical heating
9Total motor power30KW
10Electric heating power80KW
11Installation power120kw
12Man power3

Related Products