TTC100 cable tool setter consists of a hardware and the software. The model of the software is SP-T10; the hardware also has two accessories:
1)20 mm thick mounting base;
2)Blow- cleaning device (optional).
Parameters of the TTC100 tool setter:
Diameter of the working plane: 25mm
Diameter of the main body: 48.5mm
Height (H): 80mm
Quantity of Red LED: 1pcs
Maximum over travel in -Z: 5mm
Trigger force (F): 5.7-6.3N(570-630g)
Hardness of the working plane: HRB90-93
Repeatability (2σ): 2.0μm
Parallelism between the working plane and bottom 3.0μm
Sealing degree: IP68
Rated input voltage: 24±10%V DC
Rated input current: 50mA
Logic of the output signal: Normally opened (or Normally closed)
Length of the cable: 6m
Length of the jacket: 3m
Tool setter transmits signal through cable, reversal connecting tool setter's power supply can reverse the state of the output signal;
There are two installing and fixing methods, one is to install directly, the other is to add a mounting base of 20mm thick, the tool setter's height can be raised from 80mm to 100mm.
One LED indicator light is used to display the tool setter's working state.
Set lengths parameter of cutting tools automatically before CNC processing;
Detect wear and breakage of cutting tools automatically between two processes or after the CNC processing;
Through checking cutting tool parameters to control the change of machining precision from the temperature change of the machine;
Applicable equipments: various specifications of machine centers, CNC milling machines, drilling-tapping machine centers, etc;
Tool setter's cable: TTC100 tool setter is equipped with 6m long, four-core,anti-oil shielding , moving cable and with a 3m-long stainless steel protecting sleeve.
Notes for purchase:
As for the cable length, verify whether the cable length equipped is enough for installing the tool setter on your machine tool; If lengthening cable is needed, special instructions should be given when ordering the product;
Verify whether you need blow-cleaning device or not, and whether there is a spare M code in the CNC system of your machine for controlling the blowing device.