M14 series type universal cylindrical grinding machines are used for grinding external or internal surfaces of rotary work-pieces of cylinder and taper workpiece in almost every country all over the world because of the high quality with competitive price.
The longitudinal movement of the worktable is driven by hydraulic or by hand wheel. The worktable can rotate to a certain degree so as to be suitable for grinding taper.
The wheel head cross feed is driven by hydraulic, which realizes automatic periodical feed and rapid feed. It can also do rough and fine feed through hand wheel.
|Cylindrical grinding machine||M1432-1000|
|Diameter of grinding||8~320mm|
|Maximum grinding length||1000mm|
|ID grinding speed||10000r/min|
|Maximum spindle load-bearing||150kg|
|Maximum travel of working table||1100mm|
|Speed of working table||100~4000mm/min|
|Rotary angel of working table||-3~+7°|
|Rotary angel of headstock||-30~90°|
|Rotary angel of grinding wheel||±30°|
|Center sleeve taper||4#|
|Grinding wheel size||Φ500x50xφ203|
|Speed of headstock||25/50/75/110/150/220r/min|
|Speed of grinding wheel||1340r/min|
|High-speed travel of grinding wheel||50mm|
|Maximum travel of grinding wheel||280mm|
|Feeding rate of grinding wheel handwheel per grid||0.0025mm|
|Feeding rate of grinding wheel handwheel per rev||2mm|
|Power of grinding wheel motor||5.5kw|
|Power of headstock motor||1.5kw|
|Power of oil pump motor||0.75kw|
|Power of cooling motor||0.2kw|
|Dimension (length * width * height)||3650*1810*1515mm|
|Roundness Accuary:||≤2 μm|
|Cylindricity Accuary:||≤3 μm|
|Roughness(ID/OD)||Ra 0.32 μm|
1:How can I choose the most suitable machines ?
A: Please tell me your specifications ,we can choose the best model for you , or you can choose the exact model .
You can also send us the products drawing ,we will choose the most suitable machines for you .
2: What's your main products of your company?
A: We specialized in all kinds of machines ,such as CNC Lathe Machine ,CNC Milling Machine ,Vertical Machining Center ,Lathe Machines ,Drilling Machine ,Radial Drilling Machine ,Sawing Machine ,Shaper machine and so on .
3: Where is our factory located? How can I visit there?
A : Our factory is located in Tengzhou City ,Shandong Province,277500 China. You are warmly welcomed to visit us.
4. What is your trade terms?
A : FOB, CFR and CIF all acceptable.
5: What's the Payment Terms ?
A : T/T ,30% initial payment when order ,70% balance payment before shipment ;
Irrevocable LC at sight .
5: What's the MOQ?
A: 1 set .(Only some low cost machines will be more than 1 set )